Oppo has not yet made public an official announcement regarding the debut date of the Reno 10 series in market. Youku, China’s top online video and streaming service platform, recently aired a commercial that disclosed that the Reno 10 Pro will be presented to the public at 2:30 pm (local time) on May 24. This information was obtained through the advertisement. According to speculations, the lineup will consist of three different versions: the Reno 10, the Reno 10 Pro, and the Reno 10 Pro Plus.
Each of these devices will be powered by a different chipset, namely the Snapdragon 778G, the Dimensity 8200, and the Snapdragon 8+ Gen 1 chipsets. The design of the Reno 10 Pro+ appears to be displayed in an advertisement for the Reno 10 series that has been discovered on Youku (see the screengrab that can be found below). In addition, the well-known leaker Digital Chat Station has published a new post on Weibo in which they provide the most important details on the Reno 10 and the Reno 10 Pro. This is what you can anticipate from each of these devices.
Oppo Reno 10 specifications (rumored)
The display on the Reno 10 will be a 6.74-inch curved-edge OLED display with an FHD+ resolution of 2412 x 1080 and a refresh rate of 120Hz when it is released. It will sport a front-facing camera that is a Sony IMX709 with 32 megapixels. The primary camera will be an OmniVision OV64B with 64 megapixels, an 8 megapixel IMX355 ultra-wide camera, and a 32 megapixel Sony IMX709 telephoto camera with 2 times the zoom. All three cameras will be located on the back of the device.
It is anticipated that the Reno 10 will be driven by a Snapdragon 778G processor, have 12 gigabytes of RAM, and be equipped with a 4,600mAh battery that supports 80W fast charging. The device will have a weight of 180 grams and have a thickness of 7.58 millimeters.
Oppo Reno 10 Pro specifications (rumored)
The display and front-facing camera on the Reno 10 Pro will be identical to those found on the Reno 10. Its rear-facing triple camera set will consist of an optical image stabilization-enabled 50-megapixel Sony IMX890 primary camera, an 8-megapixel IMX355 ultra-wide camera, and a 32-megapixel Sony IMX709 telephoto camera with 2x magnification. All three cameras will be manufactured by Sony.
The Reno 10 Pro will come equipped with either 12 or 16 gigabytes of RAM and a Dimensity 8200 SoC. It is anticipated that the device will have a battery capacity of 4,600 mAh and compatibility for 100 W rapid charging. It will have a thickness of 7.68 millimeters and weigh 186 grams.
Both the Reno 10 and the Reno 10 Pro will contain a fingerprint sensor embedded in the display, as well as NFC, an IR blaster, and a center frame made of plastic. Both of these gadgets will be available in a variety of colors and finishes, such as Brilliant Gold, Colorful Blue, and Moon Sea Black.
